Pellet Stove Furnace
Pellet stoves are offered as freestanding units or fireplace inserts that give your home the appearance of a traditional wood-burning fireplace. These stoves are available in freestanding models as well as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fire.
The auger moves pellets from the hopper to the combustion chamber where they are burned to create heat. Sensors detect the flame and adjust the rate of operation in order to maintain a desired room temperature.
1. Energy Efficiency
Pellet stoves are a non-toxic, renewable fuel made from compressed sawdust as well as other materials. They are usually disposed of in landfills, but they can be used to provide a clean, efficient source of heat. They aid homeowners in reducing their energy use and lower greenhouse gas emissions. Many owners of pellet stoves report recouping their initial investment in just a few years through lower heating bills.
Pellets are stronger and more compressed than natural wood, making them more efficient in burning. They also produce less creosote than traditional wood-burning fireplaces. Furthermore, they are packed in plastic bags that stop moisture from entering and require less frequent cleaning.
Similar to other heating systems, pellet stoves need to be properly sized and vented. A trained technician will be able to assess your venting needs and space requirements to ensure the most efficient results.
During installation, the hearth is built to size and the vent is fitted through a pre-cut hole your home's siding. The vent is then placed on either a side wall or the roof, based on your preference and local regulations.
Once the vent and hearth are complete then the pellet stove can be connected and switched on. Certain manufacturers provide a remote control that makes starting and maintaining the fire easy while others come with additional sensors that monitor airflow, combustion and flue temperatures, as well as pressure. When the system detects that it requires more or fewer pellets, it will signal the auger to speed up or slow down accordingly.
Every stove has a storage hopper that holds from 35 to 130 pounds of pellets until they're needed. The size of the hopper determines the frequency at which you have to replenish your stove. Larger hoppers can be used for longer periods before a refill is required. A grille pulls fresh air from the room and then passes it over a heat exchanger, which then blasts heated air into the living space through convection. A grate or auger spreads the pellets, while an under-sink pan will collect any unburnt ones, along with the combustion residue.
While pellet stoves are more efficient than wood-burning models they're not as efficient as natural gas furnaces or electric heaters. The electric components that drive their motorized parts require electricity, which could be an issue during a power failure, but backup systems are readily available like generators and batteries.
2. Low Maintenance
Pellet stoves are extremely efficient, but like all major heating appliances, they require a bit of maintenance to ensure they are operating properly. Regularly cleaning your stove's exhaust vent and the stove will stop the accumulation of harmful creosote which could cause an explosion, fire or damage to your stove or home.
A pellet stove is a device that burns compressed natural particles made of wood or other materials (like corn kernels, nutshells or small pieces of scrap wood). The pellets are introduced into the combustion chamber through an auger that is powered by electricity. The thermostat you set controls the speed of pellets being fed to the burner. The fire can be kept roaring or reduced or even snuffed out according to the temperature you set. The ash will be collected in an empty ash tray underneath the burner. It can be easily removed and disposed.
Pellets are made from the byproducts of wood processing that would otherwise be thrown away. They are a sustainable source and produce less particulates than traditional wood-burning stoves, making pellet stoves a cleaner heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals produced from pellet stoves is significantly lower than that of modern wood stoves that have been certified by the EPA.
These stoves aren't required to be vented via chimneys, as is the case with traditional wood stoves. Instead, they can be vented correctly through a wall or another exterior structure. Pellet stoves have flue ports that open at the top or rear of the appliance and are connected to the vent pipe which extends outside of the home.
One drawback of pellet stoves is that you need to purchase or store enough pellets to last through the winter time. On average, pellet stove owners use three tons of pellets during the course of winter, at a cost of $200 for each ton. These costs add up over the years however, it's cheaper than buying and transporting firewood for an old-fashioned wood-burning fireplace or stove. Be sure to purchase enough pellets so that your stove will work through the coldest winter months, and you have a suitable location to store them (preferably dry, cool and away from the ground).
3. Reduce Carbon Footprint
Pellet stoves make use of renewable biomass fuels to generate heat, which reduces the need for finite fossil fuels. This reduces the carbon footprint as well as helping diversify the energy sources used in homes.
Even the newest woodstoves that are EPA certified emit considerably less than pellet stoves. The emissions from pellet stoves are considerably lower than ones from gas furnaces. Pellets can be made of sawdust, bark, and other wood remnants. They can also include soybeans, corn or other agricultural waste. When they are burned, they release less particulates, which could cause respiratory problems and allergies and carcinogens as well as nitrous dioxide.
The main difference between a wood stove and a pellet stove is the feed system. Pellet stoves come with hoppers that contain the pellets. When the thermostat or sensors suggest that the room needs heating, the furnace turns. patio pellet stove are put into the combustion chamber and burn to generate heat. The combustion chamber moves through a heat exchanger which transfers the heat to the blower and out into the room. This process results in low emissions and no creosote buildup.
After the hopper is empty, the ash is removed using a cyclone and deposited in an ash container. The stove is fitted with a fan that circulates the clean, heated air throughout the room. The majority of pellet stoves are designed to operate with minimal maintenance and feature a large viewing window for you and your family members to take in the flames.
patio pellet stove of pellets is the main factor that influences the emissions of pellet stoves. Pellets that are not of the highest quality will cause more emissions. When selecting your pellets make sure they are certified as meeting certain standards and do not contain other ingredients such as petroleum-based or urea-based substances. Look for a company with a warranty and will repair or replace parts in the event of an issue. If you're looking to take the greener route, some states allow homeowners to get a tax credit when installing pellet stoves. This is a great way to help to offset the initial cost of this type of stove and make it more affordable to set up.
4. Reduced Noise
Pellet stoves generate less smoke and exhaust as compared to wood-burning fireplaces. They also have an electric fan to distribute heat more evenly throughout the space. This is one of the reasons pellet stoves require much less maintenance than traditional wood stoves. While wood stoves require regular cleaning of chemical residues and particles to prevent their deterioration stoves can be cleaned using an electric vacuum cleaner.
Many manufacturers have made a conscious effort to design their stoves to be simple to set up and operate as well as maintain. They also design their appliances in a wide range of styles to match your home's decor. Some models come with WIFI, a remote control, and programmable thermostat.
Most pellet stoves have a large fuel hopper that can contain between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber using an auger. The amount of heat produced and the level at which the fire gets depends on the speed at which pellets are fed into the burner. The hopper can be filled with either hardwood pellets (from dense wood species such as oak and hickory) or softwood pellets (from pine and fir). Many stoves can also use alternative biomass pellets, like those made from corn or switchgrass which are an environmentally friendly option.
Pellet stoves produce less smoke and require less maintenance because they burn a cleaner fuel than wood-burning fireplaces. They also don't require a chimney, making them a much more suitable choice for new construction or retrofits.
Pellet stoves do not require regular cleaning of creosote or other chemical like wood stoves. They only need periodic inspections to ensure the proper operation and maintenance. Based on the model, this might include a periodic inspection and cleaning of the accumulated Ash or "clinker," as well as the fan and motor. Your appliance dealer can explain the proper procedures for your specific brand and model. He can also provide information regarding safety and storage, and assist you in locating the appropriate fuel for your stove.